性色AV一区二区三区无码,国产在线播放你懂的,91福利国产在线观看网站

Before operating the elbow machine, it is necessary to do some preparatory work, not only can ensure the safety of the elbow machine in the process of use, but also can ensure that the elbow machine can work normally.
1. Determine the grounding wire of the elbow machine tool. The grounding wire used must be no less than 4mm copper flexible wire.It is forbidden to connect the voltage beyond the specified range on the elbow machine tool. Make sure the power supply is turned off when pulling out the plug-in.Megohm meter cannot be used to test the control loop.
2. When inserting and removing the plug-in of elbow machine, it is not allowed to pull out the wire or cable, which can effectively avoid the plug-in being pulled out.Do not use heavy objects to impact the encoder;The electrical box of elbow machine should be stored in an outdoor ventilated place, and it is not allowed to operate in corrosive gas and dust;The display unit of the elbow should not be hit with sharp objects.
3. Carefully check the elbow machine before use. It is not allowed to add or change PC output and input terminals privately on the elbow machine.When the power supply of the elbow machine is adjusted, the steering of the motor must be re-confirmed.The chain and other sliding parts are lubricated regularly.

Cangzhou Aocheng Machinery Equipment co., LTD.
Address : Bobei Industrial Zone, Mengcun Hui Autonomous County, Cangzhou City, Hebei Province, China
Mobile : +86-15230713671
Fax : +86-317-6218625
E-mail : 15230713671@163.com
Skype : zhiguang.wu

About Us　|　 Products　|　 Order Online　|　 Contact Us

^{<button id="imk0c"></button>}