The operation mode of cold forming elbow machine is introduced
Before cold forming elbow machine is used, want to check the switch of power supply is normal first, hydraulic oil is not prepared enough.Check whether the die is damaged or not, and whether the height meets the requirement.Adjust the viewpoint positioning frame to the appropriate orientation, put the electric heating into the press die in a regular way to start the bending machine when the first time to recognize the elbow after the point of view in place, take out the other end to repeat the above action.
Before starting, the cold forming elbow machine must carefully check that there is no commodity or foreign matter in the die.
It is forbidden to put hand into the stroke of press mould or ejector rod after cold forming elbow machine is opened.If present the abnormal condition in the production process, want to cut off the power supply to admit to stop the machine before checking.After the end of production, the power switch shall be closed and the site shall be arranged. |
